Input sets
DSSAT input files made with Generate FileX in 01 Generate. Run DSSAT on a set here: the stored files run as they were generated.| Input set | Created | Type | Crop | Region | Grid | Seasons | Cells | Status | |
|---|---|---|---|---|---|---|---|---|---|
| No input sets yet. In 01 Generate, set up the inputs and press Generate FileX. | |||||||||
Simulation runs
| Run | Started | Crop | Region | Grid | Seasons | Cells | Status | Mean yield | |
|---|---|---|---|---|---|---|---|---|---|
| No runs yet. Generate an input set in 01 Generate, then run DSSAT on it above. | |||||||||
Run
Distribution over grid cells
Selected cell
Inputs and sources of this run
Validation against observed yields
Observed-yield datasets: source, scale, years, moisture, how they are used
Simulated vs observed (each point = region × year)
Per region
| Region | Cells | Years | Observed t/ha | Simulated t/ha | Bias | r |
|---|
Model check · DSSAT reference experiment (maize, Gainesville 1982, with observed yields)
Crop
Experiment
Nitrogen × irrigation trial used to test DSSAT releases. Observed yields come with the experiment, so you can see the model against field data.
The run happens on the server: DSSAT-CSM 4.8 compiled from the official source, the same engine used for HPC job arrays.
Simulated vs observed grain yield real DSSAT output
| # | Treatment | Simulated kg/ha | Observed kg/ha | Biomass kg/ha | Irrigation mm | N uptake kg/ha |
|---|---|---|---|---|---|---|
| Press “Run DSSAT” to simulate. | ||||||
1 · Region
2 · Climate, soil and period
3 · Simulation type and crop
Cultivar, crop model, sowing, fertilizer, irrigation, tillage, amendments, simulation options, automatic management and soil are set per grid cell, in the panel under the map.
Sites and treatments
Each site × treatment becomes one point with its own inputs (weather and soil of the site). Select points in the list or on the map and set their management in the panel under the map: for example more nitrogen for “High nitrogen”, automatic irrigation for “Irrigated”.
4 · Management from literature
Searches open-access articles, theses and reports, downloads them, runs the prompt and fills the grid. Or do it step by step below.
Fills the selected cells, or all cells when none is selected.
Click a cell to select it; hold Shift and drag to select many, or pick a region above.
Cell inputs
The crops grown one after the other on the same field, for one cycle of the rotation. DSSAT runs them in sequence mode: soil water, mineral nitrogen, organic matter and residues of one crop are the starting conditions of the next, so the effect of the previous crop is simulated. The cycle repeats over the run's seasons (e.g. a 2-year cycle from 2005: years 1, 2 = 2005, 2006, then 2007, 2008 …). A winter crop sown in autumn of year 1 is harvested in year 2. Each crop's fertilizer is split ⅓ at sowing, ⅔ after 30 days; simulation options come from the Simulation options tab.
Mineral fertilizer applications, in days after sowing. Materials and methods are DSSAT's own codes. Without a schedule, the cell's total N is split ⅓ at sowing and ⅔ after 30 days (urea).
Irrigation events in days after sowing.
Tillage operations in days from sowing (negative = before sowing).
Manure, compost, residues and other organic amendments, in days from sowing (negative = before sowing).
DSSAT simulation methods for the chosen cells. Changing the crop model changes the cultivar list; cells whose cultivar the new model does not have take its default cultivar.
With automatic sowing, DSSAT sows on the first day inside the window when soil water and temperature are within the limits. Automatic irrigation (refill or fixed amount) is in the Irrigation tab. DSSAT 4.8 has automatic fertilization and automatic residue application switched off, so fertilizer and organic amendments are scheduled.
Writes every cell's experiment file (FileX, or .SQX for rotations), daily weather (.WTH), soil profile (.SOL) and calibrated cultivars (.CUL). You can look at and download the files, then run DSSAT on them in 03 Simulate.
Input set
FileX of the first cell
1 · Cells to calibrate
The grid, inputs and selection from 01 Generate. Calibrate on the selected cells, or on all cells when none is selected.
4 · Run
2 · What to adjust
Each ticked coefficient gets evenly spaced test values between Min and Max. Defaults are ±20% around the cultivar's own value, inside DSSAT's allowed range.
| Use | Coefficient | What it controls | Cultivar | DSSAT range | Min | Max | Levels | Test values |
|---|
3 · Observations and fitting
Score of a combination = 0.4·d + 0.2·r + 0.4·(1 − nRMSE), on the calibration years; d = Willmott agreement, r = correlation, nRMSE = RMSE / mean observed. The best score wins; validation years are only reported.
Observed-yield datasets: source, scale, years, moisture, how they are used
Calibration results
Best combination per unit: simulated vs observed
● calibration years · ● validation years
Per unit
| Unit | Cells | Best values | Score | d · r (cal) | nRMSE cal | nRMSE val | Bias val |
|---|
Your calibrations
How calibration works
- Prepare the grid in 01 Generate: region, weather, soils (SoilGrids per cell), management per cell (from literature or entered).
- Choose what to adjust: cultivar coefficients (each controls one part of crop development or growth) and, if management is uncertain, sowing-date shifts and nitrogen factors. Every combination of test values is one candidate.
- Run: every candidate is simulated for every selected cell and season (DSSAT batches split over many cloud workers; on the CMCC cluster the same batches run as job arrays).
- Score each candidate against observed yields, per unit (each observed region, each climate zone, or the whole grid), on the calibration years.
- Check the best candidate on the validation years it was not fitted to.
- Refine (round 2): narrower ranges around the best values.
- Apply the best values to the grid in 01 Generate (cells outside the observed units take the nearest unit in a similar climate), then run the simulation.
Outcome maps
Any DSSAT season outcome of a run, as a map, with statistics and downloads.Distribution over grid cells
1 · Runs to compare
Both runs must cover the same cells; seasons are compared year by year where both have them, otherwise as averages. With no baseline, the value of production of the scenario run is shown.
2 · Prices and costs
Input costs (for the net change)
Defaults are indicative (N ≈ EUR 1–1.5/kg; 1 mm on 1 ha = 10 m³ of water, so EUR 1/mm/ha = EUR 0.10/m³ including pumping). Set your own.
Economic impact
By year (all cells)
By region
| Region | Crop area (kha) | Yield change | Production (kt/yr) | Value (M EUR/yr) | Net (M EUR/yr) |
|---|
Method and sources
Registrations
People who registered on the portal. Approve to let them run simulations; Delete removes the request and its details.
| Registered | Name | Role | Organisation | Country | Simulation region | Status |
|---|